- Home
- Unit Converters
- Torque Converter
Torque Converter
Convert any torque between 4 units. Type a value, choose the unit it is in and the unit you want, and the answer updates as you type. Open the table to see the same torque in every unit at once.
The same torque in every unit
| Unit | Value |
|---|
Saved setups
Save a set of inputs you reuse — your usual rate, your loan, your room sizes — and load it back in one tap.
Your recent calculations
Results you calculate here are kept on this device so you can come back to them.
Formula
Result = value × (size of the starting unit ÷ size of the target unit)
1 newton-meter = 0.737562 foot-pounds
1 foot-pound = 1.35582 newton-meters
How to use it
- Type the value you want to convert.
- Choose its unit from the menu beside the box.
- Choose the unit you want under the result.
- Open the table to compare every unit, or save the setup if you convert the same units often.
Worked examples
80 foot-pounds in newton-meters
- Converted
- 108.465436 N·m
120 inch-pounds in newton-meters
- Converted
- 13.558179 N·m
Good to know
Torque is force multiplied by lever length. Car wheel nuts are commonly tightened to roughly 80–100 ft·lb, which is about 110–135 N·m; always use the figure in the vehicle manual.
Questions people ask
What is 80 foot-pounds in newton-meters?
80 ft·lb is 108.465 N·m.
What is 120 inch-pounds in newton-meters?
120 in·lb is 13.5582 N·m.
What is 10 newton-meters in inch-pounds?
10 N·m is 88.5075 in·lb.
Related calculators
Newton-meters to Foot-pounds ConverterConvert N·m to ft·lb instantly, with a conversion table.Foot-pounds to Newton-meters ConverterConvert ft·lb to N·m instantly, with a conversion table.Length ConverterConvert between 9 units of length, with a full table.Weight ConverterConvert between 8 units of weight, with a full table.Volume ConverterConvert between 14 units of volume, with a full table.Area ConverterConvert between 10 units of area, with a full table.